US $4.991,000 - 1,999 set
US $3.982,000 - 2,999 set
US $2.973,000 - 3,999 set
US $2.224,000 - 4,999 set
US $1.955,000 - 5,999 set
Paramtents
Material Semi-metallic, asbestos free
Plate color Black,blue,red
Friction coefficient 0.4u
Service life 9000-30000KM according to road condition and using habit
production standard QC/T226-1997(2005)
production permit NO XK08-003-00031
Quality system ISO9001:2008
slots can be customized
Packging & Delivery
Min Order1000 set
Briefing
Detailed
Year | 89-94 |
Friction coefficient | 0.40u-0.45u |
Service life | 9000-20000 KM accordingly |
Application | accessories motorcycle |
MOQ | 1000 sets, if stock available, it depends. |
Material : | Semi-metallic, non-asbestos ; |
Certification : | ISO 9001, SGS test report |
Product features : | 1) High friction coefficient, steady brake performance |
2) Low wear rate and very durable | |
3)Low noise and comfortable " brake feel " | |
4) Disc friendly | |
5) No asbestos |
WE ARE A FACTORY, SOURCE OF MOTORCYCLE BRAKE PADS.
HOW TO DISTINGUISH A GOOD BRAKE PAD?
Install instruction for ome brake pad as follow:
FITTING INSTRUCTION
1.Brake pads should always be fitted by a competent mechanic in accordance with the OEM
specifications. If in doubt, contact your local authorised dealer.
2.Once correctly fit your pads will need 'bedding in', this process should be started with light use
(except in emergency conditions) until good contact between the pads and discs has been achieved.
3.This process usually takes no more than the first 100 miles.
WARNING:
1.Keep your chips and disk clean off oil,dirt and other pollutants.
2.Make sure that there are sufficient overlap between the surface pastilles brake and disc brake.
SAFETY:
1.Brakes should be checked before each use and inspected on a weekly basis.
2.Replace pads when the friction material reach 2 mm thickness or pads become scored or damaged.
网络文化经营许可证:浙网文[2013]0268-027号|增值电信业务经营许可证:浙B2-20080224-1 2007-2024 Tradevv.com. All rights reserved.